This article covers maintenance and cleaning of the BCHBI-110 by Boretti.
MAINTENANCE ! Before cleaning or maintenance cut the power. Cleaning the hood WHEN TO CLEAN IT: clean it at least every 2 months to prevent the risk of fire. EXTERNAL CLEANING: use a cloth moistened in luke- warm water and neutral detergent (for painted hoods); use specific products for steel, copper or brass hoods. INTERNAL CLEANING: use a cloth (or brush) soaked in denatured ethyl alcohol. WHAT NOT TO DO: do not use abrasive or corrosive products (e.g. metal sponges, brushes, too hard bru- shes, very aggressive detergents, etc.) Cleaning the grease filters WHEN TO CLEAN IT: clean it at least every 2 months to prevent the risk of fire. HOW TO REMOVE THE FILTERS: push the catch near the handle towards the rear of the hood and pull the filter downwards HOW TO CLEAN THE FILTERS: hand wash or in the dishwasher using a neutral detergent. If washing in the dishwasher, possible discoloration of the filters does not in any way compromise their functioning. Replacing the LEDS Replace with leds of the same type. If thr light spot is damaged, it must be replaced only by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard MALFUNCTIONS If something appears not to be working properly, do the following simple checks before calling Technical Servi- ce: • If the hood is not working: Check that: The power has not been disconnected. A speed has been selected. • If the hood performs inefficiently: Check that: The motor speed selected is sufficient for the amount of smoke and vapours released. The kitchen is sufficiently ventilated to allow air inta- ke. The charcoal filter is not worn (hood in filtering ver- sion). • If the hood has turned off during normal functioning: Check that: The power has not been disconnected. the omnipolar disconnection device has not tripped. Components not provided with the product