Windy /2 900 & 1200 - Usage instructions

This article explains how to use the Windy /2 900 & 1200 by Boretti.

4 OPERATION

Control panel

Button

Function

Display

Turns the suction motor on and off at the last speed used. Displays the speed set Decrease the working speed. Increase the working speed. Activates intensive speed from any other speed even with the motor off. This speed is timed to run for 10 minutes, after which the system returns to the previous speed. Suitable to deal with maximum cooking fumes. Displays HI and the bottom right hand spot flashes once a second. Activates the motor at a speed that allows extraction of 100 m³/h for 10 minutes every hour, after which the motor stops. When the filter alarm is on, press the button for approximately 3 seconds to reset the alarm. These indications are only visible when the motor is turned off. Displays 24 and the bottom right hand spot flashes, while the motor is turned on On completing the procedure the previous indicator is turned off: FF indicates that the metal grease filters need washing. The alarm is triggered after the Hood has been in operation for 100 hours. EF indicates that the activated charcoal filter needs changing and the metal grease filters need washing. The alarm is triggered after the Hood has been in operation for 200 hours. Activates automatic shutdown after 30'. Suit- able to complete elimination of residual odours. Can be activated from any position, and is turned off by pressing the button or switching the motor off. Alternately displays the working speed and the time remaining before the hood turns off. The bottom right hand spot flashes. Turns the main lighting system on and off. Turns the ambiance lighting system on and off. 5 USEFUL HINTS To obtain the best performance it is advisable to switch 'ON' the cooker hood a few minutes (in the boost setting) before you start cooking and you should leave it running for approximately 15 minutes after finishing. IMPORTANT: NEVER DO FLAMBÉ COOKING UNDER THIS COOKER HOOD Do not leave frying pans unattended during use as over-heated fat and oil might catch fire. Do not leave naked flames under this cooker hood. Switch 'OFF' the electric and gas before removing pots and pans. Ensure heating areas on your hotplate are covered with pots and pans when using the hotplate and cooker hood simultaneously.

Was this article helpful?

0 out of 0 found this helpful

Didn’t find an answer to your question?