This article explains how to assemble the BKI 178 by Boretti.
Installing and operating your fridge
Before starting to use your fridge, you should pay attention to the following points: • Operating voltage for your fridge is 220-240 V at 50Hz. • We do not take the responsibility of the damages that occur due to ungrounded usage. • Place your fridge in a place that it would not be exposed to direct sunlight. • Your appliance should be at least 50 cm away from stoves, Gas ovens and heater cores, and should be at least 5 cm away from electrical ovens. • Your fridge should never be used outdoors or left under the rain. • When your fridge is placed next to a deep freezer, there should be at least 2 cm between them to prevent humidity on the outer surface. • Do not place heavy items on the appliance. • Do not place anything on your fridge, and install your fridge in a suitable place so that at least 15 cm is available on the upper side. • The adjustable front legs should stabilized in an appropriate height to allow your fridge operate in a stable and proper way. You can adjust the legs by turning them clockwise (or in the opposite direction). This should be done before placing food in the fridge. • Before using your fridge, wipe all parts with warm water added with a tea spoonful of sodium bicarbonate, and then rinse with clean water and dry. Place all parts after cleaning. Before using your fridge • When it is operated for the first time or after transportation, keep your fridge in the upright position for 3 hours and plug it on to allow efficient operation. Otherwise, you may damage the compressor. • Your fridge may have a smell when it is operated for the first time; the smell will fade away when your fridge starts to cool.