This article covers maintenance and cleaning of the BIKB60 / BIKB90 by Boretti.
MAINTENANCE AND CLEANING
Switch-off the appliance before cleaning. Do not clean the hob if the glass is too hot because they are risk of burns. • • • • • Remove light marks with a damp cloth with washing up liquid diluted in a little water. Then rinse with cold water and dry the surface thoroughly. Highly corrosive or abrasive detergents and cleaning equipment likely to cause scratches must be absolutely avoided. Do not ever use any steam-cleaner or pressure washer. Do not use any object that may scratch the ceramic glass. Ensure that the pan is dry and clean. Ensure that there are no grains of dust on your ceramic hob or on the pan. Sliding rough saucepans will scratch the surface. • Spillages of sugar, jam, jelly, etc. must be removed immediately. You will thus prevent the surface being damaged. WHAT TO DO IN CASE OF A PROBLEM The hob or the cooking zone doesn't start-up: • The table is badly connected on the electrical network. • The protection fuse cut-off. • The cooking function is activated. • The sensitive keys are covered of grease or water. • An object is put on the keys. The control panel displays [ U ]: • Il n'y a pas de casserole sur la zone de cuisson. • Le récipient utilisé n'est pas compatible avec l'induction. • Le diamètre du fond de casserole est trop petit par rapport à la zone de cuisson. The control panel displays [ E ]: • Le système électronique est défectueux. • Débranchez et rebranchez l'appareil. • Appelez le Service Après-ventes. One or all cooking zone cut-off: • The safety system functioned. • You forgot to cut-off the cooking zone for a long time. • One or more sensitive keys are covered. • The pan is empty and its bottom overheated. • The hob also has an automatic reduction of Booster level and breaking Automatic overheating Continuous ventilation after cutting off the hob: • This is not a failure, the fan continuous to protect the electronic device. • The fan cooling stops automatically. The automatic cooking system doesn't start-up: • The cooking zone is still hot [ H ]. • The highest Booster level is set [ 9 ]. The control panel displays [ U ]: • Refer to the chapter "Keep warm“. The control panel displays [II]: • Refer to the chapter “Stop&Go“ The control panel displays[]or[ Er03 ] : • An object or liquid covers the control keys. The symbol disappears as soon as the key is released or cleaned. The control panel displays [E2] : • The hob is overheated, let it cool and then turn it on again. The control panel displays [ E8 ] : • The air inlet of the ventilator is obstructed, release it. The control panel displays [ U400 ]: • The hob is not connected to the network. Check the connection and reconnect the hob. The control panel displays [ Er47 ]: • The hob is not connected to the network. Check the connection and reconnect the hob. If one of the symbols above persists, call the SAV. ENVIRONMENT PRESERVATION • The materials of packing are ecological and recyclable. • The electronic appliances are composed of recyclable, and sometimes harmful materials for the environment, but necessary to the good running and the safety of the appliance. • • Don't throw your appliance with the household refuses Get in touch with the waste collection centre of your commune that is adapted to the recycling of the household appliances.