This article covers the safety guidelines for the BIKW-40 by Boretti.
Safety
Precautions before using • Unpack all the materials. • The installation and connecting of the applian- ce have to be done by approved specialists. The manufacturer can not be responsible for damage caused by building-in or connecting errors. • To be used, the appliance must be well-equi- pped and installed in a kitchen unit and an adapted and approved work surface. • This domestic appliance is exclusively for the cooking of food, to the exclusion of any other domestic, commercial or industrial use. • Remove all labels and self-adhesives from the ceramic glass. • Do not change or alter the appliance. • The cooking plate can not be used as freestan- ding or as working surface. • The appliance must be grounded and connec- ted conforming to local standards. • Do not use any extension cable to connect it. • The appliance can not be used above a dis- hwasher or a tumble-dryer: steam may da- mage the electronic appliances. Using the appliance • Switch the heating zones off after using. • Keep an eye on the cooking using grease or oils: that may quickly ignite. • Be careful not to burn yourself while or after using the appliance. • Make sure no cable of any fixed or moving appliance contacts with the glass or the hot saucepan. • Magnetically objects (credit cards, floppy disks, calculators) should not be placed near to the engaged appliance. • Do not place any metallic object except hea- ting containers. In case of untimely engaging or residual heat, this one may heat, melt or even burn. • Never cover the appliance with a cloth or a protection sheet. This is supposed to beco- me very hot and catch fire. • This appliance is not intended for use by per- sons (including children) with reduced physi- cal, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concer- ning use of the appliance by a person respon- sible for their safety. • Children should be supervised to ensure that they do not play with the appliance. • Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot. Precautions not to damage the appliance • Raw pan bottoms or damaged saucepans (not enamelled cast iron pots,) may damage the ceramic glass. Sand or other abrasive materials may da- mage ceramic glass. • Avoid dropping objects, even little ones, on the vitroceramic. • Do not hit the edges of the glass with sauce- pans. • Make sure that the ventilation of the appli- ance works according to the manufacturer's instructions. • Do not put or leave empty saucepans on the vitroceramic hobs. • Sugar, synthetic materials or aluminium sheets must not contact with the heating zones. These may cause breaks or other al- terations of the vitroceramic glass by coo- ling: switch on the appliance and take them immediately out of the hot heating zone (be careful: do not burn yourself). • Never place any hot container over the con- trol panel. • If a drawer is situated under the embedded appliance, make sure the space between the content of the drawer and the inferior part of the appliance is large enough (2cm). This is essential to guaranty correct ventilation. • Never put any inflammable object (ex. sprays) into the drawer situated under the vitrocera- mic hob. The eventual cutlery drawers must be resistant to heat. Precautions in case of appliance failure • If a defect is noticed, switch on the appliance and turn off the electrical supplying. • If the ceramic glass is cracked or fissured, you must unplug the appliance and contact the after sales service. • If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard. • Repairing has to be done by specialists. Do not open the appliance by yourself. • WARNING: If the surface is cracked, switch off the appliance to avoid the possibility of electric shock. Other protections • Note sure that the container pan is always centred on the cooking zone. The bottom of the pan must have to cover as much as pos- sible the cooking zone. • For the users of pacemaker, the magnetic field could influence its operating. We re- commend getting information to the retailer or of the doctor. • Do not to use aluminium or synthetic material containers: they could melt on still hot cook- ing zones. What to do in case of a problem The hob or the cooking zone doesn't start-up • The hob is badly connected on the electrical network. • The protection fuse cut-off • The locking function is activated • The sensitive keys are covered of grease or water. • An object is put on a key. The symbol [ U I displays • There is no pan on the cooking zone. • The pan is not compatible with induction. • The bottom diameter of the pan is too small. The symbol [ E ] displays • The electronic system is defective. • Disconnect and replug the hob. • Call the After-sales Service. One or all cooking zones cut-off • The safety system functioned • You forgot to cut-off the cooking zone for a long time. • One or more sentive keys are covered. • The pan is empty and its bottom overheated. Continuous ventilation after cutting-off the hob • This is not a failure, the fan continuous to protect the electronic device. • The fan cooling stops automatically. Electrical connection • The installation of this appliance and the connection to the electrical network should be entrus- ted only to an electrician perfectly to the fact of the normative regulations and which respects them scrupulously. • Protection against the parts under tension must be ensured after the building-in. • The data of connection necessary are on the stickers place on the hob casing near the con- nection box. • The connection to the main must be made using an earthed plug or via an omnipolar circuit breaking device with a contact opening of at least 3 mm. • The electrical circuit must be separated from the network by adapted devices, for example: circuit breakers, fuses or contactors. Caution! This appliance has only to be connected to a network 230 V~ 50 Hz. Connect always the earth wire. Respect the connection diagram. Use the connecting cable that is attached to the device. The green / yellow wire correspond to the earth wire, the blue wire correspond neutral wire and the brown wire correspond to the phase. Mains Connection Cable diameter Cable 230V~1P+N 50Hz 1 Phase + N 3 x 2,5 mm² H05VV-F Protection calibre 16 A * H 05 RR - F
- calculated with the simultaneous factor following standard EN 60 335-2-6/1990 Caution! Ensure that you correctly attach the wires and the bridges and tighten the screws properly. Boretti cannot be held responsible for any incident resulting from incorrect connection or which could arise from the use of an appliance which has not been earthed or has been equipped with a faulty earth connection.