This article explains how to use the BKK-97 by Boretti.
Control panel
Timer display
Control light timer
Power and zone type display
Timer key
Extension zone key Control light extension zone [-] key Use of the appliance Sensitive keys Your ceramic hob is equipped with electronic controls with sensitive touch keys. When your finger touches the key, the corresponding command is activated. This activation is validated by a control light, a letter or a number in the display and/or a “beep” sound. Touch only one key on the same time. Display Display Designation Function 0 Zero The heating zone is activated 1...9 Power level Selection of the cooking level Heat accelerator Automatic cooking ப Error message Electronic failure Error message Heating zone failure Residual heat The heating zone is hot Pause The pause is activated Residual heat indicator After the switch off of a heating zone or the complete stop of the hob, the heating zones are still hot and indicates [H] on the display. The symbol [H] disapears when the heating zones may be touched without danger. As far as the residual heat indicators are on light, don't touch the heating zones and don't put any heat sensitive object on them. There are risks of burns and fire. Starting-up and appliance management Before the first use Clean your hob with a damp cloth, and then dry the surface thoroughly. Do not use detergent which risks causing blue-tinted colour on the glass surface. Starting-up Start-up/switch off the hob Action Control panel Display To start : touch the key [0/1] [0] To stop: touch the key [0/1] nothing or [H] Start-up/switch off a heating zone Action Control panel Display Increase power touch the key [+] [4] to [9] Decrease power touch the key [-] [9] to [1] Stop touch simultaneous [+] and [-] [0] or [H] Extension zone Start-up the extension zone Action Activate Control panel touch the key [] touch the key [-] or [+] Display extension zone control light is blinking Switch off the extension zone Action Stop Control panel touch the key [] touch the key [-] or [+] [1] to [9] Saving the concentric heating zone function The software remembers the last switching state of each zone (small or big diameter). After switching on the cooking zone again, the last state will be activated, if the extension zone is activated or not. Timer The timer is able to be used simultaneous with all 4 heating zones and this with different time settings (from 0 to 99 minutes) for each heating zone. Setting and modification of the "Egg Timer" The "Egg Timer” is independent from the heating zones. If this timer is on and you stops the hob, the "Egg Timer" will continue until the end of the time. Action To start: Control panel touch the key [0/1] Display [0] To select the "Egg Timer” press once on timer key [00] [-] and [+] simultaneously Decrease the time press on timer key [-] [30] wents to 29,28,... Increase the time press on timer key [+] the time increases... When the time reaches [00.] it is blinking and beeping. To stop the "Egg Timer" Action Control panel Display To select the "Egg Timer” press once on timer key the time displays [-] and [+] simultaneously displays [01] To stop the "Egg Timer" press on timer key [-] press second time on timer key [-] displays [00] Setting and modification of the cooking time of a heating zone Action To select a heating zone To select the power level To select the « Timer >>> Decrease the time Increase the time Control panel press on key [+] press on key [+] or [-] press on timer key [-] and [+] simultaneously until the desired heating zone press on timer key [-] press on timer key [+] Display [4] [1] to [9] timer control light from the desired heating zone is on [30] wents to 29,28,... the time increases... The time is configured and the cooking starts until the time reaches [00]. To stop the cooking time of a heating zone Action Control panel Display To stop the « Timer >>> press on timer key [+] and [-] simultaneously until the desired heating zone the time displays press on timer key [-] displays [01.] press second time on timer key [-] displays [00.] If several timers are activated repeat the process. Automatic stop at the end of the cooking time As soon as the selected cooking time is finished the timer displays blinking [00] and a sound rings and the heating zone stops. To stop the sound and the blinking it is enough to press the timer key [-] or [+]. Automatic cooking All the cooking zones are equipped with an automatic “go and stop” cooking device. The cook- ing zone starts at full power during a certain time, then reduces automatically its power on the preselected level. Start-up Action Zone selection Control panel press on key [+] Display [4] Full power setting press on key [+] [4] to [9] Automatic cooking press on key [+] [9] is blinking with [A] Power level selection press on key [-] [9] [8] [7] ......... [1] (for example << 7 ») [7] is blinking with [A] Switching off the automatic cooking Action Control panel To stop the function press the zone key [-] Display [0] and [+] simultaneously Pause function This function brakes all the hob's cooking activity and allows restarting with the same settings. Start up / Stop the pause function Action Engage pause Control panel press "Pause” key Display displays [II] in the heating zone displays Stop the pause press "Pause" key and press any key [+] or [-] pause control light is blinking Control panel Timer display Control light timer Power and zone type display Timer key Extension zone key Control light extension zone [-] key Use of the appliance Sensitive keys Your ceramic hob is equipped with electronic controls with sensitive touch keys. When your finger touches the key, the corresponding command is activated. This activation is validated by a control light, a letter or a number in the display and/or a “beep” sound. Touch only one key on the same time. Display Display Designation Function 0 Zero The heating zone is activated 1...9 Power level Selection of the cooking level Heat accelerator Automatic cooking ப Error message Electronic failure Error message Heating zone failure Residual heat The heating zone is hot Pause The pause is activated Residual heat indicator After the switch off of a heating zone or the complete stop of the hob, the heating zones are still hot and indicates [H] on the display. The symbol [H] disapears when the heating zones may be touched without danger. As far as the residual heat indicators are on light, don't touch the heating zones and don't put any heat sensitive object on them. There are risks of burns and fire. Starting-up and appliance management Before the first use Clean your hob with a damp cloth, and then dry the surface thoroughly. Do not use detergent which risks causing blue-tinted colour on the glass surface. Starting-up Start-up/switch off the hob Action Control panel Display To start : touch the key [0/1] [0] To stop: touch the key [0/1] nothing or [H] Start-up/switch off a heating zone Action Control panel Display Increase power touch the key [+] [4] to [9] Decrease power touch the key [-] [9] to [1] Stop touch simultaneous [+] and [-] [0] or [H] Extension zone Start-up the extension zone Action Activate Control panel touch the key [] touch the key [-] or [+] Display extension zone control light is blinking Switch off the extension zone Action Stop Control panel touch the key [] touch the key [-] or [+] [1] to [9] Saving the concentric heating zone function The software remembers the last switching state of each zone (small or big diameter). After switching on the cooking zone again, the last state will be activated, if the extension zone is activated or not. Timer The timer is able to be used simultaneous with all 4 heating zones and this with different time settings (from 0 to 99 minutes) for each heating zone. Setting and modification of the "Egg Timer" The "Egg Timer” is independent from the heating zones. If this timer is on and you stops the hob, the "Egg Timer" will continue until the end of the time. Action To start: Control panel touch the key [0/1] Display [0] To select the "Egg Timer” press once on timer key [00] [-] and [+] simultaneously Decrease the time press on timer key [-] [30] wents to 29,28,... Increase the time press on timer key [+] the time increases... When the time reaches [00.] it is blinking and beeping. To stop the "Egg Timer" Action Control panel Display To select the "Egg Timer” press once on timer key the time displays [-] and [+] simultaneously displays [01] To stop the "Egg Timer" press on timer key [-] press second time on timer key [-] displays [00] Setting and modification of the cooking time of a heating zone Action To select a heating zone To select the power level To select the « Timer >>> Decrease the time Increase the time Control panel press on key [+] press on key [+] or [-] press on timer key [-] and [+] simultaneously until the desired heating zone press on timer key [-] press on timer key [+] Display [4] [1] to [9] timer control light from the desired heating zone is on [30] wents to 29,28,... the time increases... The time is configured and the cooking starts until the time reaches [00]. To stop the cooking time of a heating zone Action Control panel Display To stop the « Timer >>> press on timer key [+] and [-] simultaneously until the desired heating zone the time displays press on timer key [-] displays [01.] press second time on timer key [-] displays [00.] If several timers are activated repeat the process. Automatic stop at the end of the cooking time As soon as the selected cooking time is finished the timer displays blinking [00] and a sound rings and the heating zone stops. To stop the sound and the blinking it is enough to press the timer key [-] or [+]. Automatic cooking All the cooking zones are equipped with an automatic “go and stop” cooking device. The cook- ing zone starts at full power during a certain time, then reduces automatically its power on the preselected level. Start-up Action Zone selection Control panel press on key [+] Display [4] Full power setting press on key [+] [4] to [9] Automatic cooking press on key [+] [9] is blinking with [A] Power level selection press on key [-] [9] [8] [7] ......... [1] (for example << 7 ») [7] is blinking with [A] Switching off the automatic cooking Action Control panel To stop the function press the zone key [-] Display [0] and [+] simultaneously Pause function This function brakes all the hob's cooking activity and allows restarting with the same settings. Start up / Stop the pause function Action Engage pause Control panel press "Pause” key Display displays [II] in the heating zone displays Stop the pause press "Pause" key and press any key [+] or [-] pause control light is blinking Starting-up and appliance management Before the first use Clean your hob with a damp cloth, and then dry the surface thoroughly. Do not use detergent which risks causing blue-tinted colour on the glass surface. Starting-up Start-up/switch off the hob Action Control panel Display To start : touch the key [0/1] [0] To stop: touch the key [0/1] nothing or [H] Start-up/switch off a heating zone Action Control panel Display Increase power touch the key [+] [4] to [9] Decrease power touch the key [-] [9] to [1] Stop touch simultaneous [+] and [-] [0] or [H] Extension zone Start-up the extension zone Action Activate Control panel touch the key [] touch the key [-] or [+] Display extension zone control light is blinking Switch off the extension zone Action Stop Control panel touch the key [] touch the key [-] or [+] [1] to [9] Saving the concentric heating zone function The software remembers the last switching state of each zone (small or big diameter). After switching on the cooking zone again, the last state will be activated, if the extension zone is activated or not. Timer The timer is able to be used simultaneous with all 4 heating zones and this with different time settings (from 0 to 99 minutes) for each heating zone. Setting and modification of the "Egg Timer" The "Egg Timer” is independent from the heating zones. If this timer is on and you stops the hob, the "Egg Timer" will continue until the end of the time. Action To start: Control panel touch the key [0/1] Display [0] To select the "Egg Timer” press once on timer key [00] [-] and [+] simultaneously Decrease the time press on timer key [-] [30] wents to 29,28,... Increase the time press on timer key [+] the time increases... When the time reaches [00.] it is blinking and beeping. To stop the "Egg Timer" Action Control panel Display To select the "Egg Timer” press once on timer key the time displays [-] and [+] simultaneously displays [01] To stop the "Egg Timer" press on timer key [-] press second time on timer key [-] displays [00] Setting and modification of the cooking time of a heating zone Action To select a heating zone To select the power level To select the « Timer >>> Decrease the time Increase the time Control panel press on key [+] press on key [+] or [-] press on timer key [-] and [+] simultaneously until the desired heating zone press on timer key [-] press on timer key [+] Display [4] [1] to [9] timer control light from the desired heating zone is on [30] wents to 29,28,... the time increases... The time is configured and the cooking starts until the time reaches [00]. To stop the cooking time of a heating zone Action Control panel Display To stop the « Timer >>> press on timer key [+] and [-] simultaneously until the desired heating zone the time displays press on timer key [-] displays [01.] press second time on timer key [-] displays [00.] If several timers are activated repeat the process. Automatic stop at the end of the cooking time As soon as the selected cooking time is finished the timer displays blinking [00] and a sound rings and the heating zone stops. To stop the sound and the blinking it is enough to press the timer key [-] or [+]. Automatic cooking All the cooking zones are equipped with an automatic “go and stop” cooking device. The cook- ing zone starts at full power during a certain time, then reduces automatically its power on the preselected level. Start-up Action Zone selection Control panel press on key [+] Display [4] Full power setting press on key [+] [4] to [9] Automatic cooking press on key [+] [9] is blinking with [A] Power level selection press on key [-] [9] [8] [7] ......... [1] (for example << 7 ») [7] is blinking with [A] Switching off the automatic cooking Action Control panel To stop the function press the zone key [-] Display [0] and [+] simultaneously Pause function This function brakes all the hob's cooking activity and allows restarting with the same settings. Start up / Stop the pause function Action Engage pause Control panel press "Pause” key Display displays [II] in the heating zone displays Stop the pause press "Pause" key and press any key [+] or [-] pause control light is blinking