This article covers the safety guidelines for the BPOL-60 by Boretti.
ATTENTION
If the door or the gasket seals of the door are damaged, the oven may not be used until it is repaired by a qualified service technician; This appliance and its internal components, especially electrified parts, may only be repaired, modified or customized by the manufacturer, its service department or similarly qualified persons. Incompetent repairs can cause serious accidents, damage to the appliance and its surroundings and malfunctions. If the appliance fails to operate or requires repair, contact our service department. Use only original replacement parts. IMPORTANT As a safety precaution, before cleaning the oven, always disconnect the plug from the outlet or remove the appliance's power cord. In addition, avoid using acid or alkaline substances (such as lemon, vinegar, salt, tomatoes, etc.). Avoid using products containing chlorine, acids or abrasives, especially for cleaning painted parts. CARE AND MAINTENANCE Although the cooking chamber is made of high-quality steel, incorrect maintenance can cause corrosion; The oven must be cleaned periodically and all food residues must be removed; Do not clean the oven immediately after the dish has been removed because the residual drops of steam are still very hot (danger of burns); check that the display shows a low residual temperature or none. Take care when opening the door when the oven is on because the exiting steam can cause burns. Do not use rough abrasives or sharp metal scrapers to clean the glass door of the oven because they could scratch the surface and cause the glass to shatter. During cleaning, take care that no water enters the appliance. Use only slightly damp rags. Never spray water inside or outside of the appliance. Do not use steam devices for cleaning because water that penetrates could cause damage. Do not use the appliance for heating or humidifying the room. Make use of the "child lock" key). IMPORTANT The oven's identification plate is even accessible when the appliance is installed. This identification plate, which is visible when you open the door, shows all the information you will need when requesting replacement parts for the appliance.