This article covers maintenance and cleaning of the BPWK-45 by Boretti.
TROUBLESHOOTING
If you feel the appliance is out of order, follow these instructions to try to see if you can solve the problem simply by yourself before calling for service. N° PROBLEM PROBLEM POSSIBLE CAUSE / MEASURE 1 The wine cooler does not operate Not plugged in. 2 The wine cooler is not cold enough The appliance is turned off. The circuit breaker tripped or a blown fuse. Check the temperature control setting. External environment may require a higher setting. The door is opened too frequently. The door is not closed completely. The door gasket does not seal properly. 3 Automatically turn-on and turn-off frequently The room temperature is hotter than normal. A large amount of contents has been added to the wine cooler. The door is opened too frequently. The door is not closed completely. The temperature control is not set correctly. The door gasket does not seal properly. 4 The lighting does not work Not plugged in. The circuit breaker tripped or a blown fuse. The lighting is turned off. 5 Too much vibration Check to assure that the appliance is level. Check to assure no parts inside the cabinet or in the compressor chamber are loose. 6 The wine cooler seems to make too much noise The rattling noise may come from the flow of the refrigerant, which is normal. As each cycle ends, you may hear gurgling sounds caused by the flow of refrigerant. Contraction and expansion of the inside walls may cause popping and crackling noises. 7 The door will not close properly. The appliance is not level. The wine cooler is not level. The door was reversed and not properly installed. The gasket is dirty. The shelves are out of position. 8 The display window is shown with "HH" or "LL" instead of a digital figure, and/or with continuous buzz sound. The temperature probe is out of order.