This article explains how to use the BPWKN 177 by Boretti.
- Run Indicator light illuminates to signify the cooling mode is currently in operation.
- "Light" To control the inner light turn on/off. You can turn the interior light ON or OFF by pushing the button marked with the “LIGHT” button.
- The LED light will be turned off automatically after 10 minutes to save energy. Press the button with the “LIGHT” button again to turn the light on.
- The LED light can be remained on continuously by pressing and holding the "LIGHT” button for 5 seconds and the display will show "LP". After 4 seconds, the display will revert back to normal. Then the light will remain “ON” until manually switched off.
- To revert back and conserve energy (recommended), press and hold the "LIGHT” button again for 5 seconds, the display will show “LF”. After 4 seconds, the display will revert back to normal, and the light will be automatically switched off after 10 minutes. Caution When the door is open, you can manually press the “LIGHT” button to turn on or off the light, and when the door is closed, the light settings wont change from your last operation before the door closed. But when you open the door again, the light will remain on automatically.
- "Power" To turn this appliance on/off.
- "Set Up" button To set the temperature of the upper chamber.
- "Set Middle" button To set the temperature of the middle chamber.
- "Up chamber" To show the temperature of the up chamber.
- "Middle chamber" To show the temperature of the middle chamber. Upper zone: The temperature setting can be adjusted from 5°C to 10°C. Middle zone: The temperature setting can be adjusted from 10°C to 18°C. The controls (lower zone)
- "Up" button Use to raise (warm) the temperature in 1°C.
- "Down" button Use to lower (cool) the temperature in 1°C.
- Display Shows the temperature of the lower compartment. Lower zone: The temperature setting can be adjusted from 10°C to 18°C.