This article contains the manual for the MLBX60 by Boretti.
Congratulations on purchasing a Boretti appliance!
This safe and reliable high-quality appliance can assist you in your work with long-lasting top-level performance. It also has the added advantage of being quick and simple to install and easy to use. Please read this manual carefully, as it provides important information for the correct installation and use of the appliance which will ensure its long-term efficiency. The following symbols are used to assist you in reading this manual: Important rules for personal safety and the safety of the appliance General information The manufacturer reserves the right to make any changes deemed suitable to the product without prior notice. The drawings, installation diagrams and tables contained in this manual are approximate and for informational purposes only. The systems for connecting the appliance must comply with current national regulations. The partial or complete reproduction or photocopying of the contents of this manual is forbidden, as well as the sending of this manual to third parties, without the Manufacturer's permission. This appliance is compliant with the EU Low Voltage Directive 2014/35/EU, Electromagnetic Compatibility Directive 2014/30/EU. The instructions in this booklet are valid only for the country of destination. This manual provides information on the operation and maintenance of various oven models; follow the ones specific to your oven. It can be easily recognised based on the appearance of the control panel or can be seen on the data plate (for its position see page 11). The oven must be empty when turned on for the first time, and it should be set at maximum temperature for about 60 minutes. During this time the oven may emit smoke or unpleasant odours (due to the burning of the grease used in the factory processing of the oven), so the room should be aired well during its operation. Allow the oven cavity to cool completely with the door closed and thoroughly clean the front panel, accessories and interior of the cavity following the procedures indicated in the respective chapter. A tangential cooling fan starts automatically during cooking in order to cool the oven surfaces and eliminate the normal formation of steam inside the cavity. After the appliance has been switched off the fan remains in operation until the oven cools, thus preventing the cabinet from overheating. Four (4) hours after manual cooking has been started, provided that the manual cooking has not been interrupted, the oven switches off automatically unless the user desires to continue cooking