This article covers the safety guidelines for the WINE CELLAR FRIDGE BUILT - IN 24 HOMME by Boretti.
Remember to keep this booklet so you can refer to it at any time. In case of sale, transfer or should you move, remember to keep it together with the device. Read the instructions carefully: there is important information about installation, use and safety. To prevent danger stemming from instability of the device, you must fasten it in place, following the assembly instructions strictly. Whenever moving or transporting the device, keep it in a vertical position. The beverage centre must not be used by children or invalids, without supervision by an adult or a tutor, in order to prevent the cellar from being used improperly. Children may use the beverage centre only if supervised by an adult, in order to prevent them from playing with the cellar. After installing the device, the power cable and socket must be easy to reach. Keep the ventilation openings on the casing of the device free. Do not use mechanical devices, or any means not suggested by the manufacturer, to speed up defrosting. Do not damage the coolant circuit. Contact the after sales service to replace the neon. The cable must not be bent or crushed. The cable must be checked on a routine basis and replaced only by authorised technicians. The power supply cable is of a Y type. Contact the after sales service to replace it. Do not use electrical equipment inside the food compartments, unless they are of a kind suggested by the manufacturer. The Manufacturer shall not be liable if any of the above rules are not complied with. DATA SHEET Model Temperatures Dimensions BUILT-IN 24 HOMME CELLAR 1 Zone width cm 60 length cm 44,8 depth cm 55 Weight** Weight 30,5 Kg 35,5 kg Power 120 W Current 0,80 A Lamp 1 x 6 W Consumption 0,9 kWh/24h Voltage* Frequency Hz* 115-240 V 50-60
- These values may change in different countries. In order to find the specific features of your device, check the product features plate.
** When the device is empty.