Cet article explique comment utiliser le BKK-77 de Boretti.
Affichage
Affichage
Désignation
Fonction
La zone de chauffe est activée. 1...9 Niveau de puissance Choix du niveau de cuisson. Accélérateur de chauffe Cuisson automatique. Message d'erreur Défaut de circuit électronique. Chaleur résiduelle La zone de cuisson est chaude. Verrouillage La table est sécurisée. Maintien Chaud La cuisson est maintenue à 70℃. || Pause La table est en pause. MISE EN ROUTE ET GESTION DE L'APPAREIL Avant la première utilisation Nettoyez votre appareil avec un chiffon humide, puis séchez-le. N'utilisez pas de détergent qui risquerait de provoquer une coloration bleutée sur les surfaces vitrées. Touches sensitives Votre appareil est équipé de touches sensitives permettant de commander les différentes fonctions. Un effleurage de la touche active leur fonctionnement. Cette activation est validée par un voyant, un affichage et/ou par un signal sonore. Dans le cas d'une utilisation générale n'appuyez que sur une seule touche à la fois. Zone de sélection de puissance “ SLIDER “ et de réglage de la minuterie Pour la sélection de la puissance par le slider faire glisser votre doigt sur la zone “SLIDER“. Vous bénéficiez également d'un accès direct en posant votre doigt directement sur le niveau souhaité. Zone de sélection de puissance "SLIDER" et de réglage de la minuterie "SLIDER" Accès direct Mise en route • Enclencher / arrêter la table de cuisson : Action Control panel To start press key [] To stop press key [] • Start up / switch off a heating zone: Action Control panel Zone selection press display [ 0 ] selected To set slide on the "SLIDER" (adjust the power) to the right or to the left To stop slide to [ 0 ] on “SLIDER“ or press on [0] If no action is made within 20 second the electronics returns in waiting position. Residual heat indication After the switch off of a heating zone or the complete stop of the hob, the heating zones are still hot and indicates [ H ] on the display. The symbol [ H ] disappears when the heating zones may be touched without danger. As far as the residual heat indicators are on light, don't touch the heating zones and don't put any heat sensitive object on them. There are risks of burn and fire. Extension zone • Switch off/on the extension zone: Action Control panel Zone selection press display [ 0 ] selected To set slide on the "SLIDER" Switch off Touch key [] Switch on Touch key [] Timer The timer is able to be used simultaneous with all 4 heating zones and this with different time settings (from 0 to 99 minutes) for each heating zone. • Setting and modification of the cooking time: Example for 16 minutes at power 7: Action Control panel Zone selection press display [ 0 ] selected Select the power level slide on the "SLIDER“ to [ 7] Select << Timer >>> press display [ CL ] Set the units slide on the "SLIDER“ to [ 6] Valid the units press display [ 06 ] Set the tens slide on the "SLIDER“ to [ 1] Valid the tens press display [ 16 ] The time is confirmed and the cooking starts. • To stop the cooking time: Example for 13 minutes at power 7: Action Control panel Zone selection press display [7] selected Select << Timer >>> press key [13] Deactivate the units slide on the "SLIDER“ to [ 0 ] Valid the units press display [ 10 ] Deactivate the tens slide on the "SLIDER“ to [ 0 ] Valid the tens press display [ 00 ] • Automatic stop at the end of the cooking time: As soon as the selected cooking time is finished the timer displays blinking [ 00 ] and a sound rings. To stop the sound and the blinking it is enough to press the key [ 00 ]. • Egg timer function: Example for 29 minutes: Action Activate the hob Select<< Timer >>> Set the units Valid the units Set the tens Valid the tens Control panel press display [①] press display [CL ] Display zone control lights are on [00] slide on the "SLIDER“ to [ 9] [0 fixed ] [ 9 blinking ] press display [ 09 ] [ 0 blinking ] [ 9 fixed ] slide on the "SLIDER“ to [ 2] [ 2 blinking ] [ 9 fixed ] [29] press display [ 29 ] After a few seconds the control light stops with blinking. As soon as the selected cooking time is finished the timer displays blinking [ 00 ] and a sound rings. To stop the sound and the blinking it is enough to press the display [ 00 ]. The hob switches off. Automatic cooking All the cooking zones are equipped with an automatic “go and stop” cooking device. The cooking zone starts at full power during a certain time, then reduces automatically its power on the pre- selected level. • Start-up: Action Zone selection Full power setting Automatic cooking Power level selection (for example “ 7 “) • Action Control panel press display [ 0 ] selected slide on the "SLIDER“ to [ 9] re-press on display “SLIDER“ [ 9 ] slide on the "SLIDER“ to [ 7 ] Switching off the automatic cooking: Zone selection Power level selection Control panel press [7] from the zone slide on the "SLIDER" Pause function This function brakes all the hob's cooking activity and allows restarting with the same settings. • Startup/stop the pause function : Action Engage pause Stop the pause Control panel press [II] key during 2s press [ II ] key during 2s press an other touch or slide on the "SLIDER" Display displays [II] in the heating zone displays pause control light is blinking pause control light is off Recall Function After switching off the hob [], it is possible to recall the last settings. • cooking stages of all cooking zones (power) • minutes and seconds of programmed cooking zone-related timers • Heat up function • Press the key [①] • Then press the key [ II ] within 6 seconds The recall procedure is following: The precedent settings are activated. "Keep warm” Function This function allows to reach and maintain automatically a temperature of 70℃. This will avoid liquids overflowing and fast burning at the bottom of the pan. • To engage, to start the function « Keep warm »: Action Zone selection To engage To stop Control panel Press display [ 0 ] selected Press on key [ U ] on the “SLIDER“ Press on display [ U ] selected Slide on the "SLIDER" This function can be started independently on all the heating zones. When the pan leaves the cooking zone of the "Keep warm" function remains active during approximately 10 minutes. The maximum duration of keeping warm is 2 hours. Control panel locking To avoid modifying a setting of cooking zones, in particular during of cleaning the control panel can be locked (with exception to the On/Off key []). • Locking: Action Start Control panel press on key [①] Hob locking press simultaneously [ ] and [0] from the front right zone display re-press on display [0] • Unlocking: Action Start In the 5 seconds after start: Unlocking the hob Control panel press on key [] press simultaneously [ ] and [ L ] from the front right zone display press on key [©]