This article covers maintenance and cleaning of the BSI 83 by Boretti.
Maintenance
Prior to any maintenance operation ensure that the cooker hood is disconnected from the electrical outlet. Cleaning: The cooker hood should be cleaned regularly internally and externally. For cleaning use a cloth moistened with denatured alcohol or neutral liquid detergents. Avoid abrasive detergents.
⚠ Warning: Failure to carry out the basic standards of the cleaning of the cooker hood and réplacement of the filters may cause firě risks. Therefore we recommend observing these instructions. Anti-grease Filter - must be cleaned once a month, with non abrasive detergents, by hand or in dishwasher on low temperature and short cycle. When washed in a dishwasher, the grease filter may discolour slightly, but this does not affect its filtering capacity. Charcoal Filter - (only for filter version): The active charcoal filters F are not washable nor regenerative. It should be changed every 6 months in normal use. The active charcoal filters capture unpleasant cooking odours. Replacing lightbulbs Warning! Prior to touching the light bulbs ensure they are cooled down. Open the light cover by pressing with a finger the part marked „push“. Replace the dead bulb. Use only a halogen bulb of 20W max (G4), taking care not to touch it with naked hands. Close the light cover. LED light If the lighting group LED does not work, please contact the technical service center in order to replace the whole group.