This article covers maintenance and cleaning of the COOKER HOODS by Boretti.
Maintenance
Prior to any maintenance operation ensure that the cooker hood is disconnected from the electrical outlet. Cleaning The cooker hood should be cleaned regularly internally and externally. For cleaning use a cloth moistened with denatured alcohol or neutral liquid detergents. Avoid abrasive detergents.
⚠ Warning: Failure to carry out the basic standards of the cleaning of the cooker hood and replacement of the filters may cause fire risks. Therefore we recommend observing these instructions. Anti-grease Filter The anti-grease filter must be cleaned once a month, with non abrasive detergents by hand, or in dishwasher on low temperature and short cycle. When washed in a dishwasher, the grease filter may discolour slightly, but this does not affect its filtering capacity. Charcoal Filter - (only for filter version) The active charcoal filters are not washable nor regenerative. It should be changed every 4 months in normal use. Replacing light bulbs Warning! Before touching the bulbs, make sure they are cool. Carefully remove the glass lamp cover with a screwdriver (refer to the drawings on the last pages). Remove the defective bulb. Use only halogen bulbs with a maximum rating of 20 W, and make sure you do not touch them with your bare hand. Then fit the glass lamp cover in its original position.