This article covers the safety guidelines for the BKVD-179 BRD-103 by Boretti.
• If the model contains R600a- see name plate under refrigerant (the coolant isobutane), a natural gas that, is very environmentally friendly but also combustible. When trans- porting and installing the unit care must be taken to ensure that none of the refrigeration circuit components become damaged. In the event of damage avoid naked flames or igni- tion sources and ventilate the room in which the unit is placed for a few minutes.
⚠ Warning: Keep ventilation openings in appliance enclosure or in structure for building in, clear of obstruction. • Do not use mechanical devices or other ar- tificial means to accelerate the defrosting process. • Do not use electrical appliances in the refrig- erator or freezer compartment of the appli- ance. • If this appliance is to replace an old refrigera- tor with a lock; break or remove the lock as a safety measure before storing it, to protect children while playing might lock themselves inside. • Old refrigerators and freezers contain insu- lation gases and refrigerant, which must be disposed of properly. Entrust the disposal of a scrap unit categorically to competence of your local waste disposal service and contact your local authority or your dealer if you have any questions. Please ensure that the pipe of work of your refrigerating unit does not get damaged prior to being picked-up by the rel- evant waste disposal service. Important note: Please read this booklet before installing and switching on this appliance. The manufacturer assumes no responsibility for incorrect instal- lation and usage as described in this booklet. • Do not use adapters or shunts, which could cause overheating or burning. • Do not plugin old, damaged power supply ca- bles. • Do not twist and bend the cables, and keep them away from hot surfaces. • Do not plug the power supply with wet hands. Warning: Do not use mechanical devices or other means to accelerate the defrosting pro- cess, other than those recommended by the manufacturer. Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recom- mended by the manufacturer. Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction. Do not damage the refrigerant circuit. • Do not damage the refrig- erant circuit. • Do not allow children to play with the appliance. Children must never sit in the drawers or hang on the door. • If the model contains R600a- see name plate under refrigerant (the coolant isobutane), a natural gas that, is very environmentally friendly but also combustible. When trans- porting and installing the unit care must be taken to ensure that none of the refrigeration circuit components become damaged. In the event of damage avoid naked flames or igni- tion sources and ventilate the room in which the unit is placed for a few minutes. Warning: Keep ventilation openings in appliance enclosure or in structure for building in, clear of obstruction. • Do not use mechanical devices or other ar- tificial means to accelerate the defrosting process. • Do not use electrical appliances in the refrig- erator or freezer compartment of the appli- ance. • If this appliance is to replace an old refrigera- tor with a lock; break or remove the lock as a safety measure before storing it, to protect children while playing might lock themselves inside. • Old refrigerators and freezers contain insu- lation gases and refrigerant, which must be disposed of properly. Entrust the disposal of a scrap unit categorically to competence of your local waste disposal service and contact your local authority or your dealer if you have any questions. Please ensure that the pipe of work of your refrigerating unit does not get damaged prior to being picked-up by the rel- evant waste disposal service. Important note: Please read this booklet before installing and switching on this appliance. The manufacturer assumes no responsibility for incorrect instal- lation and usage as described in this booklet. • Do not use adapters or shunts, which could cause overheating or burning. • Do not plugin old, damaged power supply ca- bles. • Do not twist and bend the cables, and keep them away from hot surfaces. • Do not plug the power supply with wet hands. Warning: Do not use mechanical devices or other means to accelerate the defrosting pro- cess, other than those recommended by the manufacturer. Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recom- mended by the manufacturer. Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction. Do not damage the refrigerant circuit. • Do not damage the refrig- erant circuit. • Do not allow children to play with the appliance. Children must never sit in the drawers or hang on the door. • If the model contains R600a- see name plate under refrigerant (the coolant isobutane), a natural gas that, is very environmentally friendly but also combustible. When trans- porting and installing the unit care must be taken to ensure that none of the refrigeration circuit components become damaged. In the event of damage avoid naked flames or igni- tion sources and ventilate the room in which the unit is placed for a few minutes. Warning: Keep ventilation openings in appliance enclosure or in structure for building in, clear of obstruction. • Do not use mechanical devices or other ar- tificial means to accelerate the defrosting process. • Do not use electrical appliances in the refrig- erator or freezer compartment of the appli- ance. • If this appliance is to replace an old refrigera- tor with a lock; break or remove the lock as a safety measure before storing it, to protect children while playing might lock themselves inside. • Old refrigerators and freezers contain insu- lation gases and refrigerant, which must be disposed of properly. Entrust the disposal of a scrap unit categorically to competence of your local waste disposal service and contact your local authority or your dealer if you have any questions. Please ensure that the pipe of work of your refrigerating unit does not get damaged prior to being picked-up by the rel- evant waste disposal service. Important note: Please read this booklet before installing and switching on this appliance. The manufacturer assumes no responsibility for incorrect instal- lation and usage as described in this booklet. • Do not use adapters or shunts, which could cause overheating or burning. • Do not plugin old, damaged power supply ca- bles. • Do not twist and bend the cables, and keep them away from hot surfaces. • Do not plug the power supply with wet hands. Warning: Do not use mechanical devices or other means to accelerate the defrosting pro- cess, other than those recommended by the manufacturer. Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recom- mended by the manufacturer. Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction. Do not damage the refrigerant circuit. • Do not damage the refrig- erant circuit. • Do not allow children to play with the appliance. Children must never sit in the drawers or hang on the door. • If the model contains R600a- see name plate under refrigerant (the coolant isobutane), a natural gas that, is very environmentally friendly but also combustible. When trans- porting and installing the unit care must be taken to ensure that none of the refrigeration circuit components become damaged. In the event of damage avoid naked flames or igni- tion sources and ventilate the room in which the unit is placed for a few minutes. Warning: Keep ventilation openings in appliance enclosure or in structure for building in, clear of obstruction. • Do not use mechanical devices or other ar- tificial means to accelerate the defrosting process. • Do not use electrical appliances in the refrig- erator or freezer compartment of the appli- ance. • If this appliance is to replace an old refrigera- tor with a lock; break or remove the lock as a safety measure before storing it, to protect children while playing might lock themselves inside. • Old refrigerators and freezers contain insu- lation gases and refrigerant, which must be disposed of properly. Entrust the disposal of a scrap unit categorically to competence of your local waste disposal service and contact your local authority or your dealer if you have any questions. Please ensure that the pipe of work of your refrigerating unit does not get damaged prior to being picked-up by the rel- evant waste disposal service. Important note: Please read this booklet before installing and switching on this appliance. The manufacturer assumes no responsibility for incorrect instal- lation and usage as described in this booklet. • Do not use adapters or shunts, which could cause overheating or burning. • Do not plugin old, damaged power supply ca- bles. • Do not twist and bend the cables, and keep them away from hot surfaces. • Do not plug the power supply with wet hands. Warning: Do not use mechanical devices or other means to accelerate the defrosting pro- cess, other than those recommended by the manufacturer. Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recom- mended by the manufacturer. Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction. Do not damage the refrigerant circuit. • Do not damage the refrig- erant circuit. • Do not allow children to play with the appliance. Children must never sit in the drawers or hang on the door. • If the model contains R600a- see name plate under refrigerant (the coolant isobutane), a natural gas that, is very environmentally friendly but also combustible. When trans- porting and installing the unit care must be taken to ensure that none of the refrigeration circuit components become damaged. In the event of damage avoid naked flames or igni- tion sources and ventilate the room in which the unit is placed for a few minutes. Warning: Keep ventilation openings in appliance enclosure or in structure for building in, clear of obstruction. • Do not use mechanical devices or other ar- tificial means to accelerate the defrosting process. • Do not use electrical appliances in the refrig- erator or freezer compartment of the appli- ance. • If this appliance is to replace an old refrigera- tor with a lock; break or remove the lock as a safety measure before storing it, to protect children while playing might lock themselves inside. • Old refrigerators and freezers contain insu- lation gases and refrigerant, which must be disposed of properly. Entrust the disposal of a scrap unit categorically to competence of your local waste disposal service and contact your local authority or your dealer if you have any questions. Please ensure that the pipe of work of your refrigerating unit does not get damaged prior to being picked-up by the rel- evant waste disposal service. Important note: Please read this booklet before installing and switching on this appliance. The manufacturer assumes no responsibility for incorrect instal- lation and usage as described in this booklet. • Do not use adapters or shunts, which could cause overheating or burning. • Do not plugin old, damaged power supply ca- bles. • Do not twist and bend the cables, and keep them away from hot surfaces. • Do not plug the power supply with wet hands. Warning: Do not use mechanical devices or other means to accelerate the defrosting pro- cess, other than those recommended by the manufacturer. Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recom- mended by the manufacturer. Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction. Do not damage the refrigerant circuit. • Do not damage the refrig- erant circuit. • Do not allow children to play with the appliance. Children must never sit in the drawers or hang on the door. • If the model contains R600a- see name plate under refrigerant (the coolant isobutane), a natural gas that, is very environmentally friendly but also combustible. When trans- porting and installing the unit care must be taken to ensure that none of the refrigeration circuit components become damaged. In the event of damage avoid naked flames or igni- tion sources and ventilate the room in which the unit is placed for a few minutes. Warning: Keep ventilation openings in appliance enclosure or in structure for building in, clear of obstruction. • Do not use mechanical devices or other ar- tificial means to accelerate the defrosting process. • Do not use electrical appliances in the refrig- erator or freezer compartment of the appli- ance. • If this appliance is to replace an old refrigera- tor with a lock; break or remove the lock as a safety measure before storing it, to protect children while playing might lock themselves inside. • Old refrigerators and freezers contain insu- lation gases and refrigerant, which must be disposed of properly. Entrust the disposal of a scrap unit categorically to competence of your local waste disposal service and contact your local authority or your dealer if you have any questions. Please ensure that the pipe of work of your refrigerating unit does not get damaged prior to being picked-up by the rel- evant waste disposal service. Important note: Please read this booklet before installing and switching on this appliance. The manufacturer assumes no responsibility for incorrect instal- lation and usage as described in this booklet. • Do not use adapters or shunts, which could cause overheating or burning. • Do not plugin old, damaged power supply ca- bles. • Do not twist and bend the cables, and keep them away from hot surfaces. • Do not plug the power supply with wet hands. Warning: Do not use mechanical devices or other means to accelerate the defrosting pro- cess, other than those recommended by the manufacturer. Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recom- mended by the manufacturer. Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction. Do not damage the refrigerant circuit. • Do not damage the refrig- erant circuit. • Do not allow children to play with the appliance. Children must never sit in the drawers or hang on the door. • If the model contains R600a- see name plate under refrigerant (the coolant isobutane), a natural gas that, is very environmentally friendly but also combustible. When trans- porting and installing the unit care must be taken to ensure that none of the refrigeration circuit components become damaged. In the event of damage avoid naked flames or igni- tion sources and ventilate the room in which the unit is placed for a few minutes. Warning: Keep ventilation openings in appliance enclosure or in structure for building in, clear of obstruction. • Do not use mechanical devices or other ar- tificial means to accelerate the defrosting process. • Do not use electrical appliances in the refrig- erator or freezer compartment of the appli- ance. • If this appliance is to replace an old refrigera- tor with a lock; break or remove the lock as a safety measure before storing it, to protect children while playing might lock themselves inside. • Old refrigerators and freezers contain insu- lation gases and refrigerant, which must be disposed of properly. Entrust the disposal of a scrap unit categorically to competence of your local waste disposal service and contact your local authority or your dealer if you have any questions. Please ensure that the pipe of work of your refrigerating unit does not get damaged prior to being picked-up by the rel- evant waste disposal service. Important note: Please read this booklet before installing and switching on this appliance. The manufacturer assumes no responsibility for incorrect instal- lation and usage as described in this booklet. • Do not use adapters or shunts, which could cause overheating or burning. • Do not plugin old, damaged power supply ca- bles. • Do not twist and bend the cables, and keep them away from hot surfaces. • Do not plug the power supply with wet hands.