This article explains how to assemble the BR82 by Boretti.
Installation
Important! For electrical connection carefully follow the instructions given in specific paragraphs. • Unpack the appliance and check if there are damages on it. Do not connect the ap- pliance if it is damaged. Report possible damages immediately to the place you bought it. In that case retain packing. • It is advisable to wait at least four hours before connecting the appliance to allow the oil to flow back in the compressor. • Adequate air circulation should be around the appliance, lacking this leads to over- heating. To achieve sufficient ventilation follow the instructions relevant to installa- tion. • Wherever possible the back of the product should be against a wall to avoid touching or catching warm parts (compressor, con- denser) to prevent possible burn. • The appliance must not be located close to radiators or cookers. • Make sure that the mains plug is accessi- ble after the installation of the appliance. • Connect to potable water supply only. 4)