This article explains how to assemble the BR179 A+ by Boretti.
Preparation
Unpacking
Remove all packing materials. Check attachments and materials Checking should be conducted with reference to the Packing List. Contact the local distributor if discrepancies are found. Ensure proper location of the refrigerator.
*Make sure the refrigerator is kept upright during handling. If an inclination is required, it should not exceed 45 degrees. Otherwise the appliance may get damaged resulting not only in compromised refrigeration performance.
*To avoid product damage or personal injury, the refrigerator should be unpacked by two persons after it is located in a previously selected position.
*Before installation, make sure the refrigerator has no visible exterior damage.
*When handling the refrigerator, do not lift it by holding the worktop, to prevent any damage to the refrigerator.
*Do not start up a refrigerator that is damaged. Clean the refrigerator before use. (See the following section "Cleaning") Idle time After the refrigerator has been sited and cleaned, let it stand for more than 30 minutes before connecting the power source.