BV82 - Usage instructions

This article explains how to use the BV82 by Boretti.

Use This appliance is marked with the **** symbol, which means that the compartment is suitable for freezing fresie food and long-term storage of frozen food. Cleaning the interior Before using the appliance for the first time, wash the interior and all internal accessories with lukewarm water and some neutral soap so as to remove the typical smell of a brand-new product, then dry thoroughly. Freezer controls ! Do not use detergents or abrasive powders, as these will damage the finish. 1 Pilot light (green) 2 Thermostat control knob 3 Fast freeze light (yellow) 4 Fast freeze switch and for stopping the acoustic alarm (warning light on) 5 Warning light (red) Starting-up Insert the plug into the wall socket. Turn the thermostat knob (2) clockwise after the position «O». The pilot light (1) will light up and a sound is on only for 2 sec., indicating that the appliance is powered. The warning light (5) will blink and the sound signal alarm will get on, indicating that the temperature inside the appliance is too high. Push the button (4), the sound signal alarm will get off and pushing the button a second time the super control light (3) light up. The freezer will start to operate. To stop operation, simply turn the thermostat knob to position «O» and a sound is on only for 2 sec. Temperature control • Turn knob () beyond the «O» position until its pointer coincides with the required setting. • The minimum setting (least cold) is represented by the lowest number and the maximum setting (coldest) by the highest number. • To safely store frozen and deep-frozen foods, the inner temperature of the freezer must be at least

-18°C or colder. A medium setting is generally the most suitable. • The following effects are of significance in respect of the interior temperature: • Ambient temperature • Quantity and temperature of the food stored; • Frequency with which the door is opened and how long it is left open • the location of the appliance. Quick freezing Activate fast freeze by depressing the fast freeze switch (4). The pilot lamp (3) will then light up. If the quick-freezing function is not ended manually, the appliance switch off the quick-freezing function after 52 hours. The yellow light goes out. The SUPER function can be ended by pressing the button (4) again. The yellow light goes out.

Warning light (red)

If the temperature warning light (5) blinks, it indicates that the temperature within the freezer has reached a level where the safe food storage is no longer ensured. When the freezer is first switched on, the warning light blinks until the temperature has dropped to a safe level for the storage of frozen food.

Was this article helpful?

0 out of 0 found this helpful

Didn’t find an answer to your question?