This article covers maintenance and cleaning of the BI 60 / BI 60 MAT BI 80 / BI 80 MAT by Boretti.
MAINTENANCE AND CLEANING
Switch-off the appliance before cleaning. Do not clean the hob if the glass is too hot because they are risk of burn. • Remove light marks with a damp cloth with washing up liquid diluted in a little water. Then rinse with cold water and dry the surface thoroughly. • Highly corrosive or abrasive detergents and cleaning equipment likely to cause scratches must be absolutely avoided. • Do not ever use any steam-cleaner or pressure washer. • Do not use any object that may scratch the ceramic glass. • Ensure that the pan is dry and clean. Ensure that there are no grains of dust on your ceramic hob or on the pan. Sliding rough saucepans will scratch the surface. • Spillages of sugar, jam, jelly, etc. must be removed immediately. You will thus prevent the surface being damaged. WHAT TO DO IN CASE OF A PROBLEM When the symbol [ E 4 ] appears: I) The table must be reconfigured. Please implement the following steps: Important: before you start: • make sure there is no more pot on the hob • take a pot with a ferromagnetic bottom and a minimum diameter of 16 cm • disconnect the appliance from the grid by removing the fuse or turning the circuit breaker off • reconnect the table to the grid • start the procedure within 2 minutes after reconnecting the hob to the grid • don't use the [] touch