AUTOMATISCHE KOFFIEMACHINE - Safety guidelines

This article covers the safety guidelines for the AUTOMATISCHE KOFFIEMACHINE by Boretti.

During use

For installation and maintenance

Although the machine is simple to use, it is important that you read the entire booklet before installing or using the machine for the first time. By doing so, you will achieve the best performance, avoid mistakes, use the machine in absolute safety and protect the environment. This machine must only be used by adults. Other-abled persons can use the machine only if there is a person responsible for their safety that will supervise and instruct them in the use of the machine. Make sure that children do not touch the controls or play with the machine. This machine is intended for home use; another other use is considered improper and, therefore, dangerous. Always keep the machine clean. It is dangerous to modify, or attempt to modify, the characteristics of this product. The exposed parts of this machine get hot during operation and remain hot for a certain period of time after it is turned off. Keep children away until the machine has cooled. Do not touch the hot surfaces during use but use the knobs or handles. Make sure the machine is disconnected from the electric mains before any maintenance or cleaning. If the machine breaks, do not try and repair it yourself. Repairs made by unqualified persons can cause damage and accidents. Consult the contents of this booklet. If you don't find the information you need, contact the nearest service centre. This machine must be serviced by an authorised Service Centre. Always request the use of original replacement parts. For installation and maintenance After unpacking the machine, check that the product has not been damaged and that the power cord is in perfect condition. If not, contact the reseller before operating the machine. The packing materials (plastic bags, styrofoam, etc.) must not be left within the reach of children because they are potentially dangerous. Before use, check that the voltage and power listed on the machine's nameplate match the line to which it will be connected. Also make sure that the building has an efficient earth line and a suitable circuit breaker. Any service must be performed by specialised personnel. The manufacturer will not be liable if these rules are not followed.

Was this article helpful?

0 out of 0 found this helpful

Didn’t find an answer to your question?