This article explains how to use the SH RANGE by Boretti.
Using the extractor
Operation
When the appliance is switched off, pressing any button activates the standby function and the symbols are illuminated with a soft light so that you can see the functions and set them. Pressing one of the buttons activates the relevant function, and the symbol lights up in blue. In order to save energy, the operating system is provided with a device that returns the buttons to the idle setting after all functions have been switched off and illuminates them with soft light for about 30 seconds, after which they switch off. The extraction hood has 6 buttons: A: BORETTI LUMINA LED Lighting on/off B: Motor on/off C: Reduce motor speed D: Increase motor speed E: Delay switch F: Replace carbon filter /clean grease filter indicator Motor The motor has 4 settings. The display indicates the selected setting as follows: Setting 1: Button C flashes and lights up in blue Setting 2: Button C lights up in blue Setting 3: Button D lights up in blue Setting 4: Button D flashes and lights up in blue Heat sensor When the extractor is used in the automatic mode, the motor speeds are switched auto- matically by means of a heat sensor fitted in the hood. This mode is recommended only for intensive use of the cooking surface (when two or more cooking zones or burners are in use). The automatic mode is activated by pressing buttons C and D at the same time. The extrac- tor operates automatically and the heat sensor automatically adjusts the motor speed to the temperature of the cooking surface. Button B flashes to indicate that the heat sensor is on. To return to manual operation, press buttons C and D simultaneously again. The correct opera- tion of the heat sensor depends on the distance between the hood and the cooking surface. The greater the distance, the less sensitive the sensor becomes. Delay switch Your extraction unit has a delay switch. The delay switch is a timer that will switch off the extractor after a number of minutes and allows you the option of keeping the extractor running after you have finished cooking in order to re- move the last cooking odours from the kitchen while you are enjoying your meal. You can set the delay by pressing button E. Pressing the button once will set the timer at five minutes and button E will flash once re- peatedly; pressing it the second time will set the timer at 10 minutes and button E will flash twice repeatedly and pressing it for the third time will set the timer at 20 minutes and but- ton E will flash three times repeatedly. To switch off the delay timer, press button E once again. Filter indication Button F will flash to indicate when your grease filters need cleaning (after 40 hours operation). After 120 hours the F button will light up when the carbon filters need to be replaced (after 120 hours operation) if you are operating in recirculation mode. You can easily reset the filter indication by pressing button F.