This article covers maintenance and cleaning of the PYROLYSE OVEN by Boretti.
CLEANING AND MAINTENANCE
Prior to taking any action for cleaning, make sure the apparatus is cut-out from the mains. It is recommended that the oven interior be frequently cleaned. In particular, it should be cleaned every time the grill is used to prevent excessive fouling of the oven interior that may generate fumes or odours during subsequent cooking. Abrasive detergents and steam cleaning equipment should not be used for cleaning.
WARNING
Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass since they can scratch the surface, which may result in shattering of the glass. Ovens provided with the hot air system are less subject to dirt inside. Self-cleaning cycle (pyrolytic cycles) Although it is not necessary to perform the cleaning operation each time the oven has been used, do not let the oven get too dirty. Before performing self-cleaning, take out all accessories (grills, dishes, pans) to avoid damaging them, remove large cooking residues and then close the door, ensuring that it is closed properly. NOTE Usually self-cleaning requires 2.30 to 3 hours according to the amount of residue to be removed.
WARNING
Ensure that the door is in the closed position before the self-cleaning cycle starts, otherwise automatic door locking will not be completed. When the cycle is finished and the oven has COOLED COMPLETELY, remove the burned-off residues of the self-cleaning cycle with a damp cloth. Pyrolyse (auto-cleaning) Select the proper program to start a cleaning cycle. The temperature display show the writing -P- and the icon display shows the elements in use. The clock display shows "Pyro” for a few seconds. The clean time can be set according to the same rules of the automatic functions, and therefore the pyrolitic cycle can be delayed. The maximum allowed clean time is 3 hours, the minimum 1 hour. The standard time is 1h:30min; the clock display shows P1:30. At the end of the self-cleaning activity the display shows “--" steady and A flashing as long as the oven is cooling and the door remains locked. Once the oven is cool enough, the door unlocks and the display shows "End". Touch [H] key in any moment to stop the oven. The door remains locked until the oven temperature drops below the safety threshold, at this time the control unlocks the door. The cooling fan starts as soon as the function is selected and turns to its higher speed when the inner parts get hot. The oven temperature is automatically set to 475°C in order to perfectly clean the cavity. Door unlocked, lock symbol off. Door locked, lock symbol always on. Latch moving, transition in progress, lock symbol flashing. Eco-Pyrolyse When this function is active, the writing "Eco" flashes every 5 seconds on the temperature display. The standard time is 1h:30min and can never be changed, the clock display shows P1:30. It is used in case a light cleaning action is requested. CLEANING AND MAINTENANCE Prior to taking any action for cleaning, make sure the apparatus is cut-out from the mains. It is recommended that the oven interior be frequently cleaned. In particular, it should be cleaned every time the grill is used to prevent excessive fouling of the oven interior that may generate fumes or odours during subsequent cooking. Abrasive detergents and steam cleaning equipment should not be used for cleaning.
WARNING
Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass since they can scratch the surface, which may result in shattering of the glass. Ovens provided with the hot air system are less subject to dirt inside. Self-cleaning cycle (pyrolytic cycles) Although it is not necessary to perform the cleaning operation each time the oven has been used, do not let the oven get too dirty. Before performing self-cleaning, take out all accessories (grills, dishes, pans) to avoid damaging them, remove large cooking residues and then close the door, ensuring that it is closed properly. NOTE Usually self-cleaning requires 2.30 to 3 hours according to the amount of residue to be removed.
WARNING
Ensure that the door is in the closed position before the self-cleaning cycle starts, otherwise automatic door locking will not be completed. When the cycle is finished and the oven has COOLED COMPLETELY, remove the burned-off residues of the self-cleaning cycle with a damp cloth.