This article covers the warranty and environmental information for the PYROLYSE OVEN by Boretti.
Door and commands lock for children safety (pyro)
This is an additional safety functions. The door latch mechanism, managed automatically during pyrolyse can be actuated manually by the user in order to lock the oven door and prevent children from having free access to the oven. Hold and + keys simultaneously for about 3 seconds to lock/unlock the door manually. Also the keyboard is disabled while this function is actuated: the display shows a key on the clock display in case of any attempt to touch inactive keys. Buzzer volume The buzzer volume can be set, when the control is in stand-by mode, touching first the [B] key until the writing “L1”, "L2” or "L3" is displayed (depending on the set volume) then touching the [D]/[E] key. At any touch the buzzer sounds a double beep, selecting the volume out of three available levels. Night mode This mode is active between 22:00 and 8:00 overnight. During this period, the buzzer is always silent and the background blue light of the clock display reduces its brightness. Touching any keys will not cause any acoustic feedback. Failure declarations and error codes The control is continuously checking the status of the system. If an abnormal condition is detected for more than 1 minute, a failure occurs:
- The heaters and the other loads are disabled.
- The display shows a "E" letter flashing, followed by a numeric code that depends on the kind of failure.
- The control emits an acoustic warning signal that will last for some minutes. To reset a failure declaration, first remove the cause of the failure then touch the [H] key (OFF). Error E001 E008 E016 E017 E032 Description Temperature sensor shorted. Latch time-out overflow. Oven cavity overheating Temperature sensor disconnected or broken Wrong oven model configuration