This article covers maintenance and cleaning of the BPZN 60 by Boretti.
The oven’s data plate is accessible even with the oven fully installed. The plate is visible simply by opening the door. Always quote the details from it to identify the appliance when ordering spare parts. • Do not disassemble any parts prior to having disconnected the oven from the mains. • Do not use the appliance if any part is broken (for example a glass). Disconnect it from the mains and call service. • Before using the oven, it is recommended to make it operate at noload at the maximum temperature for an hour to eliminate the insulating material odour. • In all models, leave the door closed when the grill is used. • The cooling fan may remain in operation so long as the oven is hot, even after it has been switched off. • During the use the appliance becomes very hot; don’t touch the heating elements inside the oven. • During the oven operation, the front is heated as well; consequently keep children clear of the oven, especially during self-cleaning. • Parents and adults should pay particular attention when using the product in presence of children. • Children should be overseen so as to ensure that they don’t play with the equipment. • Keep children under age 8 away, unless constantly supervised. • This appliance is not intended for use by persons (including children over age 8) with reduced physical sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsable for their safety. • Children may not perform cleaning and maintenance unsupervised. • In order to avoid damage to the oven enamel coat, do not cover the oven muffle sole with any item (e.g. aluminum foil, pans and the likes). • Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass since they can scratch the surface, which may result in shattering of the glass. • Abrasive detergents and steam cleaning equipment should not be used for cleaning. • Before performing self-cleaning, take out all accessories (grills, dishes, pans, meat probe) to avoid damaging them, remove large cooking residues and then close the door, ensuring that it is closed properly. • The oven is cool and power to the oven has been turned off before removing the door. Failure to do so could result in electrical shock or burns. • The appliance must not be installedbehind a decorative door in order to avoid overheating. • WARNING: Ensure that the appliance is switched off before replacing the lamp to avoid the possibility of electric shock. • Use only the meat probe supplied with the appliance. IMPORTANT If the oven is installed in an ambient temperature below 37 °F (3 °C), F*0117 may appear; when a higher ambient temperature is reached, the error will no longer appear.