This article contains the manual for the BUILT-IN OVENS by Boretti.
The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product. General warnings Technical specifications Installation instructions Oven functions Using the grill Electronic programmer Removing and cleaning the oven door Removing and cleaning the inner glass Replacing the oven bulb Cleaning and maintenance Dimensions: Height: Width: Depth: 480mm 897mm 569mm Voltage regulations: 220-240V~ 50/60Hz Power inputs: 2270-2700W Electrical connection: Make sure that the voltage supply is the same as what is on the rating plate which can be found on the right side of the oven face. The oven must be connected at the back using a cable with minimum section of 1.5mm providing an omnipolar switch in compliance with current regulations with a contact opening distance of at least 3mm.
Warning:
Connect the wires in accordance with the following colours/codes:
BLUE BROWN YELLOW-GREEN
- NEUTRAL (N)
- LIVE (L) EARTH (±)