This article explains how to assemble the BUILT-IN OVENS by Boretti.
INSTRUCTION FOR INSTALLATION
To ensure the built-in appliance works correctly, the unit must correspond to certain characteristics. The panels of the units near the oven must be made of heat-resistant material. Especially as regards veneered wooden furniture, the glues must withstand temperatures of up to 120°C: plastic or binders that cannot withstand this temperature will deform or come unstuck. In compliance with safety regulations, once the appliance is built in, contact with electrical components must no longer be possible. All protective coverings must be fixed so they cannot be removed without the aid of a tool. The oven can be used below the worktop or in a column unit by means of 4 screws. Please see the drawing at the beginning of the present booklet. BEFORE USING THE OVEN
⚠ Attention: the oven must be unplugged from the electrical mains. Before using the oven, carefully clean the interior, the racks and the drip pan with non-abrasive soap and warm water. Insert the racks and the drip pan into their respective runners. When this operation is complete, plug the oven into the electrical mains and bring it up to maximum temperature for at least 20 minutes, in order to eliminate any residual grease, oil or resins from manufacturing, which may cause unpleasant odours during cooking; then ventilate the room. Once completed this simple operation, the oven is ready to cook for the first time.